两种方式
第一种：通过不同端口访问
首先更改/etc/apache2/ports.conf具体如下：
- # If you just change the port or add more ports here, you will likely also
- # have to change the VirtualHost statement in
- # /etc/apache2/sites-enabled/000-default
- # This is also true if you have upgraded from before 2.2.9-3 (i.e. from
- # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
- # README.Debian.gz
- #增加三个端口80、8080、82、****为你的IP
- NameVirtualHost ****:80
- Listen 80
- NameVirtualHost ****:8080
- Listen 8080
- NameVirtualHost ****:82
- Listen 82
- <IfModule mod_ssl.c>
- # If you add NameVirtualHost *:443 here, you will also have to change
- # the VirtualHost statement in /etc/apache2/sites-available/default-ssl
- # to <VirtualHost *:443>
- # Server Name Indication for SSL named virtual hosts is currently not
- # supported by MSIE on Windows XP.
- Listen 443
- </IfModule>
- <IfModule mod_gnutls.c>
- Listen 443
- </IfModule>
/etc/apache2/sites-available/下的配置文件也要改。如oj（配置文件名）
- ****为主机IP
- <VirtualHost ****:82>
- ServerAdmin webmaster@localhost
- #填写你所要建立的端口
- ServerName *****:82
- #网站目录
- DocumentRoot /var/www/html/
- <Directory />
- Options FollowSymLinks
- AllowOverride None
- </Directory>
- <Directory /var/www/>
- Options Indexes FollowSymLinks MultiViews
- AllowOverride All
- Order allow,deny
- allow from all
- </Directory>
- ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
- <Directory “/usr/lib/cgi-bin”>
- AllowOverride None
- Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
- Order allow,deny
- Allow from all
- </Directory>
- ErrorLog ${APACHE_LOG_DIR}/error.log
- # Possible values include: debug, info, notice, warn, error, crit,
- # alert, emerg.
- LogLevel warn
- CustomLog ${APACHE_LOG_DIR}/access.log combined
- Alias /doc/ “/usr/share/doc/”
- <Directory “/usr/share/doc/”>
- Options Indexes MultiViews FollowSymLinks
- AllowOverride None
- Order deny,allow
- Deny from all
- Allow from 127.0.0.0/255.0.0.0 ::1/128
- </Directory>
- </VirtualHost>
- 建立软连在/etc/apache2/sitea-enabled/目录下
敲 ln –s ../sitea-available oj
然后重启下
- sudo /etc/init.d/apache2 restart
第二种方法用域名绑定
在/etc/apache2/sites-available/下增加配置文件
如增加oj.conf
- <VirtualHost *:80>
- # The ServerName directive sets the request scheme, hostname and port that
- # the server uses to identify itself. This is used when creating
- # redirection URLs. In the context of virtual hosts, the ServerName
- # specifies what hostname must appear in the request’s Host: header to
- # match this virtual host. For the default virtual host (this file) this
- # value is not decisive as it is used as a last resort host regardless.
- # However, you must set it for any further virtual host explicitly.
- #ServerName www.example.comt
- #填写你的域名
- Servername www.acmteam.win
- ServerAdmin webmaster@localhost
- #网站目录
- DocumentRoot /var/www/html/JudgeOnline/
- # <Directory /var/www/>
- # AllowOverride None
- # Order Deny,Allow
- # Allow from all
- # </Directory>
- # Available loglevels: trace8, …, trace1, debug, info, notice, warn,
- # error, crit, alert, emerg.
- # It is also possible to configure the loglevel for particular
- # modules, e.g.
- #LogLevel info ssl:warn
- ErrorLog ${APACHE_LOG_DIR}/error.log
- CustomLog ${APACHE_LOG_DIR}/access.log combined
- # For most configuration files from conf-available/, which are
- # enabled or disabled at a global level, it is possible to
- # include a line for only one particular virtual host. For example the
- # following line enables the CGI configuration for this host only
- # after it has been globally disabled with “a2disconf”.
- #Include conf-available/serve-cgi-bin.conf
- </VirtualHost>
- # vim: syntax=apache ts=4 sw=4 sts=4 sr noet 建立软连在/etc/apache2/sitea-enabled/目录下
- 敲 ln –s ../sitea-available oj
最后重启apache
- sudo /etc/init.d/apache2 restart
原创文章，转载请注明： 转载自URl-team
本文链接地址: 配置apache2使用不同端口或者域名访问网站
No related posts.
